Electrical output: Digital output NPN+PNP
Detecting distance:3-50mm
Working voltage: 10-30VDC
Blind zone: No blind zone
Resolution ratio: 0.1mm
Accuracy: ±1%
Response time:10ms
Input Type: No learn function
Material:Copper sleeve nickel plated
Protection grade:IP67
Connect type:M12 connector 5pin
Ultrasonic sensor can detect almost all the liquid, such as pure water, oil etc...
Ultrasonic sensor can detect different Colors of printing ink, ink etc...
Whether it’s transparent material,such as glass bottle, glass board, transparent PP/PE/PET film etc...or reflective materials, such as golden foil, silver foil etc...
ultrasonic sensor can perform well.
Almost all different colors fabrics can be easily detected by ultrasonic sensor.
Ultrasonic sensor used to detect grain, automatic control of material level;Automatic level control of coal, sawdust, cement and other powder is also verysuitable.
| Model | UB50-18GM45-E4E5-V15 |
| Detecting Distance | 3-50mm |
| Blind Zone | - |
| Resolution ratio | 0.1mm |
| Repeated accuracy | ±0.15% Full range value ±0.15% |
| Accuracy | ±1%(Built-in temperature drift compensation) |
| Response time | 10ms |
| Switching frequency | 100Hz |
| Switching delay | 2mm |
| Power On Delay | <500ms |
| Working voltage | 10-30V DC |
| Red light | Normal open when no object |
| Green Light | Normal open when detecting object |
| Over load protection | Red and green lights flash at the same tim |
| No-load current | ≤30mA |
| Voltage drop | ≤2V |
| lnput type | No learn function |
| Material | Copper sleeve nickel plated, plastic fittings, glass filled epoxy resin |
| Insulation | IP67 |
| Connect type | M12 Connector, 5 pin |
| Ambient temperature | -20℃ ~+70℃ |
| Storage temperature | -40℃ ~+85℃ |
| weight | 32g |
Specially designed sensor for edge detection, using the through beam working principle.
The edge of the material place in the counter slot, in the center of the transmitter and receiver.
The sensor i worxing for judging the ofiset distance of the edge, and outputs the analog signal 0-10V or 4-2OmA coresponding to the received energ.The size of the analog signal is proportional to the deviation of the motion track of the edge of the material.
This sensor is widely used in movement correction of various packaging printing paper.
Ultrasonic sensor has excellent performance in non-contact positioning and distance measurement.
Not affected by color and shape, not limited by the material of the detected target ,it is widely used in industrial automation scenesSome typical applications:
qwifm@qwifm.com
Rm.708, No.108, Lane 1333, Xinlong Rd., Minhang District, Shanghai
qwifm@qwifm.com
Room 706, Building 28, 1333 Xinlong Road, Shanghai, China
Online Message
Telephone