Automation industry
QWIFM's multiple products are widely used in automation industry, and our continuously innovative and upgraded intelligent sensors provide technical support and guarantee for the transformation and upgrading of industry automation. Our products include photoelectric sensors, proximity sensors, laser sensors, intelligent Solid-state relay, switching power supplies, ultrasonic sensors, etc., with a complete range of products and stable performance. Key products provide technical services for the industrial control automation industry.
IM12 Long Distance Proximity Sensor Inquiry

IM12 Long Distance Proximity Sensor

1.Long distance detection, with a detection distance twice that of a regular one;
2. Anti electromagnetic interference;
3. Super waterproof, with a protection level of IP68 and up to IP69;
4. Stable performance, with short circuit protection, polarity protection, and overcurrent protection;

Product model IM12-D1NA08-L
Detecting distance 8mm
Output form NPN(PNP)NO（NC）optional
Power supply 10-30VDC
Output state Flush
Output current DC≤150mA    
Output voltage dropDC/AC DC＜1.5V
Consumption current ＜10mA
Standard detected object 12*12*1 (A3 iron)
Repeated precision 0.01
DC/AC Response frequency  500Hz
Working   environment temperature    -25℃~+70℃
Insulation resistance ≥50 MΩ
Shell material Metal
Protection grade IP67
Current   short-circuit protection 220mA（Excluding AC output product）

ITSR Three-phase Intelligent Solid State Relay

1. Small size, light weight, easy to install;
2. Anti magnetic interference, long service life;
3. Energy saving and environmental protection, strong load capacity, and fast conversion speed;
4. Metal shell, exquisite and beautiful.

Product   model    ITSR-40DA ITSR-60DA
Load Current 40A 60A
 Load Voltage 24-600VAC 24-600VAC
Control Voltage  3-48VDC 3-48VDC
Control Current  10-30mADC 10-30mADC
On Voltage  ≤2.5VAC ≤1.3VAC
Off-state   Leakage Current ≤2mA ≤4mA
Time Off ≤10ms ≤20ms
Dielectric Strength  2500VAC 2500VAC
Insulation Resistance  100MΩ/500VDC 100MΩ/500VDC
Ambient Temperature   -25℃ ~ +75℃   -25℃ ~ +75℃ 
Mounting Methods  M4 Bolted fixed M4 Bolted fixed
The work   instructions Double LED：
    (Green:Work;RED:The fault) 		Double LED：
    (Green:Work;RED:The fault)
Weight   135g 135g
ITSR Three-phase Intelligent Solid State Relay Inquiry
EN18P Mirror Reflective Photoelectric Sensor Inquiry

EN18P Mirror Reflective Photoelectric Sensor

1.Anti-glare interference, suitable for outdoor use;
2. Anti-electromagnetic interference;
3.Long distance detection;
4. Long service life with sensitivity regulator.

Product   model    EN18P-D1S200NA
Power supply 12-24VDC（10-30VDC)
Detecting distance 200cm
Output form NPN(PNP)NO（NC）optional
Standard sensing object Matte white board paper 20cm×20cm
Response time Move and reset less than 1ms
Light Red light LED 660nm/ Infrared 880nm
Ambient Temperature  -25℃ ~+55℃ without   icing and condensation
Product Standards GB/T14048.10-2016
Protection grade IP66(IEC Specification)
Material Shell: Plactic, Lens cap: Acrylic, Lens: Acrylic
Ambient illumination Lamp：Less than 3000LUS. Sunlight：Less than 11000LUS.

ENO33 Series Laser Sensor

1.Small light spot, fast speed, and high accuracy;
2.Anti-glare interference;
3.Anti-electromagnetic interference;
4.Non-Contact long distance detection;

Product model    ENO33-D1T70NA
Power supply 12-24VDC（10-30VDC)
Detecting distance 70cm
Output form NPN(PNP)NO（NC）optional
Consumption current <20mA
Minimum detection object 0.3-0.5mm
Response time Move and reset less than 1ms
Light source Red laser (wavelength 650nm)
Operating temperature range  -25℃ ~+55℃ without   icing and condensation
Operating humidity range 30-85%RH
Light spot 5mm (at 70mm)
Output current 100mA
Product standards GB/T14048.10-2016
Protection grade IP65
Material ABS+PC
Ambient illumination Lamp: less than 5000LUS. Sunshine: unlimited
Return difference 5% Max
Sensitivity adjustment Potentiometer (single turn)
ENO33 Series Laser Sensor Inquiry
Electrical equipment
Application of Electrical Equipment in the Industrial Field Intelligent Solid-state relay is currently widely used in electrical equipment such as control motors and frequency converters. ITSR series intelligent Solid-state relay is small size, anti-electromagnetic interference, heating balance inside the shell, energy conservation and environmental protection. Din-Rail switching power supplies and flat switching power supplies are also commonly used in power equipment such as distribution boxes. Switching power supplies have a long service life, small ripple coefficient, stable electrical performance, and sufficient safety power.
ITSR Three-phase Intelligent Solid State Relay Inquiry

ITSR Three-phase Intelligent Solid State Relay

Special for the heating industry;
1. Small size, light weight, easy to install;
2. Anti magnetic interference, long service life;
3. Energy saving and environmental protection, strong load capacity, and fast conversion speed;
4. Metal shell, exquisite and beautiful.

Model ITSR-40DA ITSR-60DA
Load Current 40A 60A
 Load Voltage 24-600VAC 24-600VAC
Control Voltage  3-48VDC 3-48VDC
Control Current  10-30mADC 10-30mADC
On Voltage  ≤2.5VAC ≤1.3VAC
Off-state   Leakage Current ≤2mA ≤4mA
Time Off ≤10ms ≤20ms
Dielectric Strength  2500VAC 2500VAC
Insulation Resistance  100MΩ/500VDC 100MΩ/500VDC
Ambient Temperature   -25℃ ~ +75℃   -25℃ ~ +75℃ 
Mounting Methods  M4 Bolted fixed M4 Bolted fixed
The   work instructions Double LED：
    (Green:Work;RED:The fault) 		Double LED：
    (Green:Work;RED:The fault)
Weight   135g 135g

ISSR Single Phase Intelligent Solid State Relay

Special for the heating industry;
1. Small size, light weight, easy to install;
2. Anti magnetic interference, long service life;
3. Energy saving and environmental protection, strong load capacity, and fast conversion speed;
4. Metal shell, exquisite and beautiful.

Model ISSR-25DA ISSR-40DA
 Load Current 25A 40A
 Load Voltage 24-480VAC 24-480VAC
Control Voltage  3-48VDC 3-48VDC
Control Current  3-20mADC 3-20mADC
On Voltage  ≤1.5VAC ≤1.5VAC
Off-state   Leakage Current ≤4mA ≤4mA
Time Off ≤10ms ≤10ms
Dielectric Strength 2500VAC 2500VAC
Insulation Resistance  100MΩ/500VDC 100MΩ/500VDC
Ambient Temperature  `-25℃ ~ +75℃  `-25℃ ~ +75℃ 
Mounting Methods  M4 Bolted fixed M4 Bolted fixed
The   work instructions Double LED：
    (Green:Work;RED:The fault) 		Double LED：
    (Green:Work;RED:The fault)
Weight   70g 70g
ISSR Single Phase Intelligent Solid State Relay Inquiry
IDR Series Guide Rail Switching Power Supply Inquiry

IDR Series Guide Rail Switching Power Supply

1.Din-Rail switching power supply, small size, high efficiency;
2. Anti-electromagnetic interference;
3. The ripple coefficient is small, which can improve the stability of the product.

Product model    IDR-45-12 IDR-45-24
Output 12V,0-3.75A 24V,0-2A
Tol ±1% ±1%
Ripple And Noise (R&N) 200mV 480mV
Efficiency 81% 87%
Power 45W 45W
SPECIFICATION:
 Universal AC input/ Full range
Installed on   DINrail TS35/7.5 or 15
Protections: Short   circuit/Over load/Over voltage
Certification: CE
LED working state   Indicator
Cooling by free air   convection
100% full load   burn-in test
2 years warranty
AC input voltage   range: 85-264VAC,47-63Hz,120-370VDC
AC inrush current:   cold start, 27A at 115VAC; 36A at 230VAC
DC adjustment   range:±10% rated output voltage
Over-load   protection: 105% ～ 150% of rated output power
Over-voltage:115% ～   135% of rated output power
Withstand voltage: I/P-O/P:3KVAC、   I/P-FG:1.5KVAC、0/P-FG:0.5KVAC
     in 1 minute
Working   Temperature: -10℃ -60℃
 Connection: I/P:2poles O/P: Screw DIN   terminal with 4 poles
Weight/Packing:   0.27kg,48pcs/16.5kg/1.02CUFT

LRS Series Planar Switching Power Supply

1.Flat type Miniature switching power supply, small size, high efficiency;
2. Anti-electromagnetic interference;
3. The ripple coefficient is small, which can improve the stability of the product.

Product   model  LRS-75-12 LRS-75-24
Output 12V,0-6A 24V,0-3.2A
Tol ±1% ±1%
Ripple And Noise (R&N) 120mV 150mV
Efficiency 89% 90%
Power 75W 75W
AC input voltage range 85-264VAC;120-370VDC
AC inrush current (max.)  Cold   start,50A at 230VAC
DC adjustment range ±10% by potentiometer
Overload protection Range:110%-150% ;Type:Hiccup mode , auto-recovery
Overload voltage protection Range:115%~135% rated output voltage; Type:Shut down   o/p voltage , re-power on to recover
Withstand voltage  I/P-O/P:4kVAC,I/P-FG:2kVAC,O/P-FG:1.25kVAC,1   minute
Working temperature   -30~+70℃   (refer to output derating curve)
Safety standards UL62368-1,   IEC/EN62368-1,IEC/EN61558-1,EN61558-2-16,IEC/EN60335-1,CCC GB4943,BSMI   CNS14336-1,
    EAC TP TC 004,AS/NZS 60950.1 approved
EMC standards EN55032 class   B,EN55014,EN61000-3-2,3,EN61000-4,2,3,4,5,6,8,11,GB9254,CNS13438
Connection 99×97×30
SPECIFICATION:
Universal   AC input / Full range
Withstand   300VAC surge input for 5 seconds
High   operationg temperature up to 70℃
Protections:Short   circuit / Overload / Over voltage
High   efficiency, long life and high reliability
LED indicator for power on
Withstand 5G vibration test
Ultra   compact and 1U low profile
LRS Series Planar Switching Power Supply Inquiry
EN18P Diffuse Reflection Photoelectric Sensor Inquiry

EN18P Diffuse Reflection Photoelectric Sensor

1.Anti-glare interference, suitable for outdoor use;
2. Anti-electromagnetic interference;
3.Long distance detection;
4. Long service life with sensitivity regulator.

Product   model    EN18P-D1T100NA
Power supply 12-24VDC（10-30VDC)
Detecting distance 100cm
Output form NPN(PNP)NO（NC）optional
Standard sensing object Matte white board paper 20cm×20cm
Response time Move and reset less than 1ms
Light Red light LED 660nm/ Infrared 880nm
Ambient Temperature  -25℃ ~+55℃ without   icing and condensation
Product Standards GB/T14048.10-2016
Protection IP66(IEC Specification)
Material Shell: Plactic, Lens cap: Acrylic, Lens: Acrylic
Ambient illumination Lamp：Less than 3000LUS. Sunlight：Less than 11000LUS.
Packaging machinery and equipment industry
Packaging machinery and equipment are closely related to our life. Photoelectric sensors, intelligent Solid-state relay and other products are important accessories in packaging machinery equipment. EN33 series is a small square photoelectric sensor anti-electromagnetic interference and anti-glare interference . The background suppression photoelectric sensor is not affected by the background color of the detected object, the product is anti-glare interference and can be used outdoors. ISSR series is a small size, anti-electromagnetic interference, heating balance inside the shell, energy conservation and environmental protection intelligent Solid-state relay, which is widely used in packaging machinery equipment industry and baking equipment in heating industry, is an indispensable automatic combination component in its industry.
EN33-Y Background Suppression Photoelectric Sensor Inquiry

EN33-Y Background Suppression Photoelectric Sensor

Special for food packaging machinery and equipment.
1. Anti electromagnetic interference;
2. Not affected by color and background;
3. Visible red light with small light spot;
4. Small size, easy to install.

Product   model          EN33-D1Y30NA
Power supply 12-24VDC±10%   fluctuation
Effective detection range 30cm
Output form NPN Normally open
Consumption current <20mA
Standard sensing object Matte Whiteboard Paper 20cm×20cm
Response time Move and reset less than 0.5ms
Light Red LED(WAVE length 660nm)
Ambient Temperature -25℃~+55℃ without icing and condensation
Ambient Humidity 30-85%RH
Spdt diameter Φ10mm(300mm）
Current output 100mA
Product Standards GB/T14048.10-2016
Protection level IP65(IEC)
Material Housing: reinforced ABS lens: polycarbon
Ambient illumination Lamp:Less than 5000Lux Sunlight:Infinite
Sensitivity Potentiometer


ISSR Single Phase Intelligent Solid State Relay

Dedicated to the food packaging industry and heating industry;
1. Small size, light weight, easy to install;
2. Anti magnetic interference, long service life;
3. Energy saving and environmental protection, strong load capacity, and fast conversion speed;
4. Metal shell, exquisite and beautiful.

Product   model    ISSR-25DA ISSR-40DA
Load current 25A 40A
Load Voltage 24-480VAC 24-480VAC
Control Voltage 3-48VDC 3-48VDC
Control current 3-20mADC 3-20mADC
On Voltage ≤1.5VAC ≤1.5VAC
Off-state   Leakage Current ≤4mA ≤4mA
Time Off ≤10ms ≤10ms
Dielectric Strength 2500VAC 2500VAC
Insulation Resistance 100MΩ/500VDC 100MΩ/500VDC
Ambient Temperature `-25℃ ~ +75℃  `-25℃ ~ +75℃ 
Mounting Methods M4 Bolted Fixed M4 Bolted Fixed
The Work   instructions Double LED:(Green:Work;Red:The fault) Double LED:(Green:Work;Red:The fault)
Weight   70g 70g
ISSR Single Phase Intelligent Solid State Relay Inquiry
EN33 Diffuse Reflection Photoelectric Sensor Inquiry

EN33 Diffuse Reflection Photoelectric Sensor

Special for food packaging machinery and equipment, special for equipment such as opening and sealing machines;
1. Small size, easy to install;
2. Anti-glare interference;
3. Anti electromagnetic interference;

Product   model     EN33-D1T50NA
Power supply 12-24VDC±10%   fluctuation
Effective detection range 50cm
Consumption current <30mA
Output form NPN Normally open
Standard sensing object Matte Whiteboard Paper 20cm×20cm
Response time Move and reset less than 1ms
Light Infrared LED 660nm, Infrared 880nm
Ambient Temperature -25℃~+55℃ without icing and condensation
Ambient Humidity 30-85%RH
Insulated resistance >20MΩ
Voltage resistance AC1000V 50/60Hz 1 minute
Product Standards GB/T14048.10-2016
Protection level IP64(IEC)
Material Housing: reinforced ABS lens: polycarbon
Ambient illumination Lamp: Less than 3000Lus sunlight: Less than 11000Lus
Circuit protection Protection against error output,   power supply reserve connection, pass/cut off (100ms)

NDR Series Guide Rail Switching Power Supply

1. Rail switching power supply, small size, high efficiency;
2. Anti-electromagnetic interference
3. The ripple coefficient is small, which can improve the stability of the product.

Product model    NDR-60-12 NDR-60-24
Output 12V,0-5A 24V,0-2.5A
Tol ±1% ±1%
Ripple And Noise (R&N) 120mV 180mV
Efficiency 84% 87%
Power 60W 60W
SPECIFICATION:
International   general full range AC input
Installation Din   Rail: TS-35/7, or TS-35/15  
Protection type:   Over voltage/Over load/Short circuit
Certification: CE
LED working state   Indicator
Natural Air cooling
100% full load   burn-in test
2 years warranty
AC input: 85 ～   264V/47 ～ 63HZ, or DC input: 120V ～ 370V
Inrush current:   Cold start, 20A at 110VAC, 40A at 220VAC
Over-load   protection: 105% ～ 150% of rated output power
Over-voltage:115% ～   135% of rated output power
Insulation grade:   Class Ⅱ I/P-O/P: AC 3KV
Working   temperature:-20℃～ +60℃ (Please refer to the derating curve),
Humidity: 20 ～ 90%RH   Non-condensing
Storage environment:   -40℃～ +85℃ , Humidity: 10 ～ 95%RH
MTBF ≥ 150000 hours   at 25℃
Connection: I/P:   screw terminals with 2 poles,  O/P:   screw terminals with 4 poles
Weight/Pack: 0.2Kg,   60PCS/18Kg/1.06CUFT


NDR Series Guide Rail Switching Power Supply Inquiry
Heating industry
Solid-state relay is very common in various industrial heating equipment applications. Intelligent Solid-state relay is upgraded on the basis of traditional Solid-state relay. The product is small size, anti-electromagnetic interference, heating balance inside the shell, energy conservation and environmental protection , and is widely used in printing and dyeing, plastic packaging, shoe making processing, rubber processing, chemical industry, printing and other industries.
ITSR Three-phase Intelligent Solid State Relay Inquiry

ITSR Three-phase Intelligent Solid State Relay

Special for the heating industry;
1. Small size, light weight, easy to install;
2. Anti magnetic interference, long service life;
3. Energy saving and environmental protection, strong load capacity, and fast conversion speed;
4. Metal shell, exquisite and beautiful.

Model ITSR-40DA ITSR-60DA
Load Current 40A 60A
 Load Voltage 24-600VAC 24-600VAC
Control Voltage  3-48VDC 3-48VDC
Control Current  10-30mADC 10-30mADC
On Voltage  ≤2.5VAC ≤1.3VAC
Off-state   Leakage Current ≤2mA ≤4mA
Time Off ≤10ms ≤20ms
Dielectric Strength  2500VAC 2500VAC
Insulation Resistance  100MΩ/500VDC 100MΩ/500VDC
Ambient Temperature   -25℃ ~ +75℃   -25℃ ~ +75℃ 
Mounting Methods  M4 Bolted fixed M4 Bolted fixed
The   work instructions Double LED：
    (Green:Work;RED:The fault) 		Double LED：
    (Green:Work;RED:The fault)
Weight   135g 135g

ISSR Single Phase Intelligent Solid State Relay

Special for the heating industry;
1. Small size, light weight, easy to install;
2. Anti magnetic interference, long service life;
3. Energy saving and environmental protection, strong load capacity, and fast conversion speed;
4. Metal shell, exquisite and beautiful.

Model ISSR-25DA ISSR-40DA
Load Current 25A 40A
Load Voltage 24-480VAC 24-480VAC
Control Voltage  3-48VDC 3-48VDC
Control Current  3-20mADC 3-20mADC
On Voltage  ≤1.5VAC ≤1.5VAC
Off-state   Leakage Current ≤4mA ≤4mA
Time Off ≤10ms ≤10ms
Dielectric Strength 2500VAC 2500VAC
Insulation Resistance  100MΩ/500VDC 100MΩ/500VDC
Ambient Temperature  `-25℃ ~ +75℃  `-25℃ ~ +75℃ 
Mounting Methods  M4 Bolted fixed M4 Bolted fixed
The   work instructions Double LED：
    (Green:Work;RED:The fault) 		Double LED：
    (Green:Work;RED:The fault)
Weight   70g 70g
ISSR Single Phase Intelligent Solid State Relay Inquiry
IM12 Long Distance Proximity Sensor Inquiry

IM12 Long Distance Proximity Sensor

1.Long distance detection, with a detection distance twice that of a regular one;
2. Anti electromagnetic interference;
3. Super waterproof, with a protection level of IP68 and up to IP69;
4. Stable performance, with short circuit protection, polarity protection, and overcurrent protection;

Product model IM12-D1NA08-L
Detecting distance 8mm
Output form NPN(PNP)NO（NC）optional
Power supply 10-30VDC
Output state Flush
Output current DC≤150mA    
Output voltage dropDC/AC DC＜1.5V
Consumption current ＜10mA
Standard detected object 12*12*1 (A3 iron)
Repeated precision 0.01
DC/AC Response frequency  500Hz
Working   environment temperature    -25℃~+70℃
Insulation resistance ≥50 MΩ
Shell material Metal
Protection grade IP67
Current   short-circuit protection 220mA（Excluding AC output product）

EN18P Diffuse Reflection Photoelectric Sensor

1.Anti-glare interference, suitable for outdoor use;
2. Anti-electromagnetic interference;
3.Long distance detection;
4. Long service life with sensitivity regulator.

Product   model    EN18P-D1T100NA
Power supply 12-24VDC（10-30VDC)
Detecting distance 100cm
Output form NPN(PNP)NO（NC）optional
Standard sensing object Matte white board paper 20cm×20cm
Response time Move and reset less than 1ms
Light Red light LED 660nm/ Infrared 880nm
Ambient Temperature  -25℃ ~+55℃ without   icing and condensation
Product Standards GB/T14048.10-2016
Protection IP66(IEC Specification)
Material Shell: Plactic, Lens cap: Acrylic, Lens: Acrylic
Ambient illumination Lamp：Less than 3000LUS. Sunlight：Less than 11000LUS.
EN18P Diffuse Reflection Photoelectric Sensor Inquiry
EN33 Diffuse Reflection Photoelectric Sensor Inquiry

EN33 Diffuse Reflection Photoelectric Sensor

1. Small size, easy to install;
2. Anti-glare interference;
3. Anti electromagnetic interference;

Product   model     EN33-D1T50NA
Power supply 12-24VDC±10%   fluctuation
Effective detection range 50cm
Consumption current <30mA
Output form NPN Normally open
Standard sensing object Matte Whiteboard Paper 20cm×20cm
Response time Move and reset less than 1ms
Light Infrared LED 660nm, Infrared 880nm
Ambient Temperature -25℃~+55℃ without icing and condensation
Ambient Humidity 30-85%RH
Insulated resistance >20MΩ
Voltage resistance AC1000V 50/60Hz 1 minute
Product Standards GB/T14048.10-2016
Protection level IP64(IEC)
Material Housing: reinforced ABS lens: polycarbon
Ambient illumination Lamp: Less than 3000Lus sunlight: Less than 11000Lus
Circuit protection Protection against error output,   power supply reserve connection, pass/cut off (100ms)
Automatic Parking Garage Industry
In society today, most Automatic Parking Garage Industry are located in outdoor environments, and the photoelectric sensors used to detect vehicle bodies are affected by sunlight and weather. Our company specializes in developing and producing this photoelectric sensor product for the stereo garage industry. Our EN50 series long-distance photoelectric sensors are specifically designed for use in the stereo garage industry, and the product is anti-glare interference and can be used outdoors, anti-electromagnetic interference, stable performance provides users with efficient and high-quality products tailored to their on-site usage and requirements.
EN50 Through-beam Photoelectric Sensor (30 meters detection distance) Inquiry

EN50 Through-beam Photoelectric Sensor (30 meters detection distance)

Special product for Automatic Parking Garage Industry
1. Anti-glare interference and can be used outdoors;
2. Advanced Electromagnetic compatibility, strong anti electromagnetic interference capability;
3. Unique optical design for long-distance detection;
4. Free voltage supply, relay output.

Product model EN50-D1E3000JC EN50-UE3000JC
Type Through beam type Through beam type
Detecting distance 30m 30m
Power supply 12-24VDC(10-30VDC)  AC36-240V,DC24-240V
Spot diameter Φ800mm(8m away) Φ800mm(8m away)
Light Red light LED 660nm/ Infrared   880nm(Light source Selectable） Red light LED 660nm/ Infrared   880nm(Light source Selectable）
Standard sensing object Matte white board paper 20cm×20cm
Detecting target Opaque materialsΦ16mm
Response time Move and reset less than 1ms
Control output Relay output       Capacity:DC 30V 3A Resistive load、250VAC 3A Resistive load                        10 Contact     orde：NO+NC
Ambient illumination Lamp：Less than 3000LUS. Sunlight：Less than 11000LUS.
Ambient Temperature -25℃~+55℃ without icing and condensation
Material Housing：ABS. lens：PC.
Product Standards GB/T14048.10-2016
Protection IP64(IEC)/IP67(IEC)


EN50 Through-beam Photoelectric Sensor (80 meters detection distance)

Special product for Automatic Parking Garage Industry
1. Anti-glare interference and can be used outdoors;
2. Advanced Electromagnetic compatibility, strong anti electromagnetic interference capability;
3. Unique optical design for long-distance detection;
4. Free voltage supply, relay output.

Product   model EN50-D1E8000JC EN50-UE8000JC
Type Through beam type Through beam type
Detecting distance 80m 80m
Power supply 12-24VDC(10-30VDC)  AC36-240V,DC24-240V
Spot diameter Φ1000mm(8m away) Φ1000mm(8m away)
Light Red light LED 660nm/ Infrared   880nm( Light source Selectable） Red light LED 660nm/ Infrared   880nm(Light source Selectable）
Standard sensing object Matte white board paper 20cm×20cm
Detecting target Opaque materialsΦ16mm
Response time Move and reset less than 1ms
Control output Relay output       Capacity:DC 30V 3A Resistive load、250VAC 3A Resistive load                        10 Contact     orde：NO+NC
Ambient illumination Lamp：Less than 3000LUS. Sunlight：Less than 11000LUS.
Ambient Temperature -25℃~+55℃ without icing and condensation
Material Housing：ABS. lens：PC.
Product Standards GB/T14048.10-2016
Protection IP64(IEC)/IP67(IEC)
EN50 Through-beam Photoelectric Sensor (80 meters detection distance) Inquiry
Automatic door industry
EN50 retro-reflective photoelectric sensor is specially used in the Automatic door industry. The product has a long detection distance, wide working voltage, AC/DC universal, and the relay output also has a normally open and normally closed output. It has anti-glare interference and anti-electromagnetic interference , and has long service life and strong stability.
EN50 Mirror Reflective Photoelectric Sensor Inquiry

EN50 Mirror Reflective Photoelectric Sensor

Automatic door Automatic Roller shutter industry dedicated photoelectric sensor products
1. Anti-glare interference can be used outdoors;
2. Anti electromagnetic interference;
3. High accuracy and fast response speed;
4. Long detection distance, equipped with reflective panels and brackets.

Product   model     E50-D1U500JC
Power supply 24-240VDC 36-240VAC    Wide voltage
Detecting distance 6.5m
Light Red light LED 660nm/ Infrared 880nm(Light source Selectable）
Detecting target Opaque materials with minimum  
     length of Φ60mm
Standard sensing object Matte white board paper 20cm×20cm
Response time Move and reset less than 1ms
Ambient Temperature  -25℃~+55℃ without icing   and condensation
Sensitivity Adjustable by built-in VR
Control output Relay     output   Capacity:DC 30V 3A Resistive     load、250VAC 3A Resistive load                        10 Contact     orde：NO+NC
Product Standards GB/T14048.10-2016
Protection IP64(IEC)
Material Housing：ABS. lens：PC.
Ambient illumination Lamp：Less than 3000LUS. Sunlight：Less than 11000LUS.
Automation industry Electrical equipment Packaging machinery and equipment industry Heating industry Automatic Parking Garage Industry Automatic door industry

Still looking for something

Contact

0086-13918378571 (Anna)

0086-021-66101687

qwifm@qwifm.com

Rm.708, No.108, Lane 1333, Xinlong Rd., Minhang District, Shanghai

Customer First! Let's Get Your Business Beyond Limits!

0086-13918378571 (Anna)

0086-021-66101687

qwifm@qwifm.com

Room 706, Building 28, 1333 Xinlong Road, Shanghai, China

Customer First! Let's Get Your Business Beyond Limits!
Email Email: qwifm@qwifm.com Message Contact Us Mobile Mobile: 0086-13918378571 TOP