Sensing range max.: 0...3 m
Sensing type: Retro-reflective
Voltage: 12-24VDC
Switching output: PNP
Switching mode: Normally open/closed
Connection type : cable, 3-wire, 2m
Light source : Infrared LED
Product model | Retro-reflective | ||||
---|---|---|---|---|---|
Model: | PNP | NO | EN33-D1S300PA/PB | ||
NC | |||||
Power supply | 12-24VDC±10% fluctuation | ||||
Consumption current | < 30mA | < 30mA | < 30mA | ||
Effective detection range | 200cm | 300cm | 400cm | ||
Standard sensing object | Φ60mm (refl ective) opaque object | ||||
Light | Infrared LED 660nm, Infrared 880nm | ||||
Response time | Move and reset less than 1ms | ||||
Ambient illumination | Lamp: Less than 3000Lus sunlight: Less than 11000Lus | ||||
Ambient Temperature | -25℃ ~+55℃ without icing and condensation | ||||
Ambient Humidity | 30-85%RH | ||||
Insulated resistance | > 20MΩ | ||||
Voltage resistance | AC1000V 50/60Hz 1 minute | ||||
Material | Housing: reinforced ABS lens: polycarbon | ||||
Product Standards | GB/T14048.10-2016 | ||||
Protection level | IP64(IEC) | ||||
Circuit protection | Protection against error output, power supply reserve connection, pass/cut off (100ms) |
qwifm@qwifm.com
Rm.708, No.108, Lane 1333, Xinlong Rd., Minhang District, Shanghai
qwifm@qwifm.com
Room 706, Building 28, 1333 Xinlong Road, Shanghai, China