Electrical output: Analog current+Digital Push-pull output
Detecting distance:20-150mm
Working voltage: 10-30VDC
Blind zone:0-20mm
Resolution ratio: 0.1mm
Accuracy: ±1%
Response time:20ms
Input Type: With synchronization and learning function
Material:Copper sleeve nickel plated
Protection grade:IP67
Connect type:M12 connector 5pin
Ultrasonic sensor can detect almost all the liquid, such as pure water, oil etc...
Ultrasonic sensor can detect different Colors of printing ink, ink etc...
Whether it’s transparent material,such as glass bottle, glass board, transparent PP/PE/PET film etc...or reflective materials, such as golden foil, silver foil etc...
ultrasonic sensor can perform well.
Almost all different colors fabrics can be easily detected by ultrasonic sensor.
Ultrasonic sensor used to detect grain, automatic control of material level;Automatic level control of coal, sawdust, cement and other powder is also verysuitable.
| Model | Output type |
| UB150-18GM45-AE4-V15 | Analog current+Digital Push-pull output |
| Detecting distance | 20-150mm |
| Blind zone | 0-20mm |
| Resolution ratio | 0.1mm |
| Repeated accuracy | ±0.15% Full range value ±0.15% |
| Accuracy | ±1%(Built-in temperature drift compensation) |
| Response time | 20ms |
| Switching delay | 2mm |
| Switching frequency | 50Hz |
| Power On Delay | <500ms |
| Working voltage | 10-30V DC,UB ≥ 12V |
| Red light | Normal open when on object, learning mode flashing when no object |
| Green Light | Normal open when detecting object, learning model flashing when there is object. |
| Over load protection | Red and green lights both flashing |
| Load impedance | 1/ 0~300 Ohm,U/>1k Ohm |
| No-load current | 30mA |
| Voltage drop | ≤2v |
| Input type | M12 connector 5 pin |
| Material | Copper sleeve nickel plated, plastic fittings, glass fittings, glass filled epoxy resin |
| Insulation | IP67 |
| Connection type | M12 connector 5 pin |
| Ambient temperature | -20℃ ~+70℃ ( 248-343K) |
| Storage temperature | -40℃~+85℃ ( 233-358K) |
| weight | 32g/A35g |
When Al1 and A2 are set within the effective detection range of the sensor,the ftarget is placed at the detection distance of Al or A2.When the sensordetects the target, the LED turns green.
Connect the Teach-in wire to +UB, then the green light flashes,disconnect after 3 seconds, and point A2 is set successfuly.Connect the Teach-in wire to -UB, then the green light flashes, disconnect after 3 seconds, and point Al is set successily.
When Al and A2 are set to infinity, the sensor is set to a target-free state. if the sensor cannot detect the target object the LED wil trn on the red light.
Connect the Teach-in wire to +UB, then the green light flashes, disconnect afler 3 seconds, and point A2 is set successfuly.·Connect the Teach-in wire to -UB, then the green light flashes, disconnect after 3 seconds, and point Al is set successful.
After setting points A1 and A2, the sensor has the memory function , and the last setting wil be saved afer powerfailure and restart
Ultrasonic sensor has excellent performance in non-contact positioning and distance measurement.
Not affected by color and shape, not limited by the material of the detected target ,it is widely used in industrial automation scenesSome typical applications:
qwifm@qwifm.com
Rm.708, No.108, Lane 1333, Xinlong Rd., Minhang District, Shanghai
qwifm@qwifm.com
Room 706, Building 28, 1333 Xinlong Road, Shanghai, China
Online Message
Telephone